高级检索

    锌溴液流电池负极失效机制及其抑制策略研究进展

    Deposition and stripping of Zn in zinc-bromine flow batteries: failure mechanisms and optimization strategies

    • 摘要: 锌溴液流电池凭借本征安全、环境友好、原材料储量丰富及较高理论能量密度等优势,适用于大规模长时储能场景。然而,负极锌沉积/剥离的可逆性易受多种失效行为制约,包括锌枝晶生长、“死锌”累积、析氢诱导的界面钝化以及溴物种穿梭导致的沉积锌腐蚀,从而降低电池的库仑效率、能量效率和循环寿命。上述失效行为可进一步归纳为沉积形貌失稳和界面副反应加剧两类问题,其中前者主要表现为锌枝晶生长和“死锌”累积,后者主要包括析氢引起的界面钝化以及溴物种穿梭导致的化学腐蚀。本文围绕上述两类问题系统梳理相关失效机制,并从负极电极修饰、电解液调控、隔膜修饰和系统设计四个方面总结抑制策略。针对沉积形貌失稳,相关策略主要通过改善Zn2+传质、均匀化局域电流分布和调节锌成核行为,优化负极局域能质传递与界面反应过程,从而提高锌沉积形貌稳定性。针对界面副反应加剧,相关策略则主要通过降低界面水活性、提高析氢反应能垒和限制溴物种穿梭,稳定电极/电解液界面反应环境,以缓解析氢诱导的界面钝化与多溴化物引发的化学腐蚀。未来研究应进一步利用多元化表征解析负极失效机制,并以失效机制指导材料筛选与制备,通过工程化验证和数据反馈优化材料设计与制备工艺,为高稳定性、长寿命锌溴液流电池的工程化应用提供支撑。

       

      Abstract: With the increasing demand for grid energy storage, zinc–bromine flow batteries (ZBFBs) have attracted growing interest owing to their intrinsic safety, environmental friendliness, resource abundance, and high energy density. However, the reversibility of Zn deposition/stripping at the negative electrode is limited by zinc dendrite growth, “dead Zn” accumulation, interfacial passivation associated with hydrogen evolution, and corrosion of deposited Zn caused by the crossover of bromine species. Such poor reversibility decreases the coulombic efficiency, energy efficiency, and cycle life of ZBFBs. This review examines the origins of poor reversibility by focusing on unstable Zn deposition and parasitic reactions at the electrode/electrolyte interface, and then reviews recent optimization strategies involving the negative electrode, electrolyte, membrane, and battery systems. For unstable Zn deposition, these strategies improve the mass transport of Zn2+, homogenize the local current distribution, and regulate Zn nucleation, thereby optimizing local ener-gy and mass transfer as well as interfacial reactions at the negative electrode. For parasitic interfacial reac-tions, these strategies stabilize the electrode/electrolyte interface by suppressing the reduction of interfacial water, increasing the energy barrier for hydrogen evolution, and limiting the shuttling of bromine species and polybromide anions. Future work should clarify the failure mechanisms of Zn deposition and stripping at the negative electrode through advanced characterization and apply these insights to guide material screening, fabrication, and engineering validation, thereby improving the cycling stability of ZBFBs and accelerating their commercialization.

       

    /

    返回文章
    返回