高级检索

    电化学二氧化碳捕集:从烟气到空气的机制、材料与系统

    Electrochemical carbon dioxide capture: mechanisms, materials and system from flue gas to air

    • 摘要: 二氧化碳捕集技术是碳捕集、利用与封存(CCUS)的重要组成。传统胺法依靠高温热再生实现CO2解吸与吸收剂再生,再生温度通常为100~120 ℃,能耗约4 GJ/t CO2,成为其大规模应用的主要制约。能够与可再生能源相耦合的电化学二氧化碳捕集(EMCC)技术,可在常温常压下运行,是发展低能耗捕集的重要方向。本文从机制路线、分子材料、场景适配与工程系统4个层面对该领域进行综述。首先将现有技术路线归纳为5类,即直接结合型氧化还原载体、pH摆动型质子载体、电化学介导胺再生(EMAR)、电摆动吸附(ESA)与双极膜电渗析(BPMED),其共同特征为阴极活化捕集、阳极去活化释放。基于此,2类载体的分子设计逻辑存在显著差异:直接结合型受限于还原电位、CO2结合强度与氧耐受性之间的耦合效应;而pH摆动型则需在还原电位、pH摆幅(由质子耦合数与载体pKa共同决定)与析氢安全裕度之间取得平衡。在场景层面,对比燃煤烟气(CO2 4%~15%、O2 3%~6%)、空气(CO2体积分数约425×10−6、21% O2)及低浓度CO2环境可知,氧气对氧化还原态分子的寄生氧化是烟气和空气场景的主要瓶颈,为此,分析归纳了分子工程、氧化还原解耦、膜隔离与氧还原/析氧耦合4类应对策略。在工程层面,讨论了能耗口径、放大原型与技术经济性,指出实验室报道的摩尔能耗数据多未计入全流程、与胺类洗涤法的可比性有限,低电流密度导致的低产率与高投资是放大的主要障碍。最后指出,氧耐受、结合强度与电位的解耦,膜与电极的长循环稳定性,连续流放大,以及与电网和CO2转化的一体化,是该技术走向工业示范的关键。

       

      Abstract: Carbon dioxide capture technology is a crucial component of carbon capture, utilization, and storage (CCUS). Traditionally, thermal regeneration-based chemical absorption technologies—primarily using amine scrubbers—rely on high-temperature conditions to regenerate CO2 and the absorbent, consuming substantial energy (4 GJ/t CO2), which limits their large-scale deployment. Electrochemical CO2 capture (EMCC), capable of coupling with renewable energy sources, operates at ambient temperature and pressure, representing a promising direction for low-energy capture. This review systematically examines the field across four dimensions: mechanism pathways, molecular materials, application scenarios, and engineering systems. First, existing technical routes are categorized into five types: direct-binding redox carriers, pH-swing proton carriers, electrochemically mediated amine regeneration (EMAR), electro-swing adsorption (ESA), and bipolar membrane electrodialysis (BPMED). These share a common feature: CO2 capture occurs via cathodic activation and release via anodic deactivation. Consequently, the molecular design principles differ significantly between these two carrier types: direct-binding systems face coupled constraints of reduction potential, CO2 binding strength, and oxygen tolerance; in contrast, pH-swing systems must balance reduction potential, pH swing (governed by the number of proton-coupled events and the pKa of the carrier), and HER safety margin while maintaining stability near neutrality. At the application level, comparing flue gas (CO2 4%–15%, O2 3%–6%), air (CO2 ~425×10−6, 21% O2), and low-concentration CO2 environments reveals that oxygen-sensitive redox-active molecules represent the primary bottleneck in flue gas and air applications. To address this, we analyze and summarize four strategies: molecular engineering, redox decoupling, membrane isolation, and coupling of oxygen reduction/evolution reactions. On the engineering front, energy consumption metrics, scale-up prototypes, and techno-economic feasibility are discussed. It is noted that many laboratory-reported molar energy values fail to account for full-process energy use and offer limited comparability with conventional amine scrubbing methods. Low current densities result in low capture rates and high capital costs, posing major challenges for scaling up. Finally, we emphasize that achieving industrial demonstration hinges on decoupling oxygen tolerance, binding strength, and electrochemical potential; ensuring long-term stability of membranes and electrodes; enabling continuous-flow scale-up; and integrating the system with power grids and CO2 conversion processes.

       

    /

    返回文章
    返回