Abstract:
To explore the application potential of CaCO
3 products prepared by the mineralization of bulk phosphogypsum solid waste in polymer systems, a series of CaCO
3/PVC composites were prepared using nano-calcite and nano-aragonite (synthesized in the laboratory by adjusting mineralization process and subsequently hydrophobic-modified) as fillers, with polyvinyl chloride (PVC) as the matrix. The effects of CaCO
3 crystal polymorphs and loading amounts on the mechanical properties and thermal stability of the composites were primarily investigated. The results indicate that at a filler loading of 40 phr (parts per hundred parts of resin), compared to the pure PVC matrix (tensile strength of 17.1 MPa, elongation at break of 488%), the tensile strength of the calcite-filled system decreased to 15.9 MPa. Conversely, benefiting from its high aspect ratio advantage, the aragonite-filled system maintained a tensile strength of 17.6 MPa and exhibited an increased elongation at break of 531%. These mechanical indicators are highly comparable to those of commercial nano-CaCO
3 (17.8 MPa, 518%) and significantly exceed the safety thresholds specified in the GB/T 8815—2008 national standard for cable compounds (tensile strength 10.0~12.5 MPa, elongation at break ≥ 150%). Thermal analysis results indicate that the initial thermal decomposition temperature of the aragonite system was elevated compared to the pure resin, delaying the thermal degradation process of PVC. Directionally regulated synthetic mineralized aragonite can break through the bottleneck of mechanical deterioration caused by high polymer filling, thereby providing technical support for the high-value and large-scale utilization of industrial solid waste phosphogypsum and for reducing costs and improving efficiency in plastic systems.