高级检索

    宋新庄煤矿选煤厂选煤工艺的选择

    Coal preparation process design of Songxinzhuang coal preparation plant

    • 摘要: 为提高宋新庄煤矿选煤厂选煤效率,分析了选煤厂入选原煤性质,根据产品用户对煤质的要求,确定选煤厂产品结构。以产品结构多样化、灵活性为目的,分析了选煤厂分选粒度及块煤、末煤的分选工艺。结果表明,宋新庄煤矿生产原煤为不黏煤,属低灰煤,矸石易泥化。块煤(200~25 mm)采用重介质浅槽分选机分选,末煤(

       

      Abstract: In order to improve preparation efficiency of Songxinzhuang coal preparation plant and enrich the range of products,the raw coal properties were analyzed. According to market demand,the products structure was determined. The size range of separation,lump coal and fine coal preparation process were introduced. The results showed that the raw coal of Songxinzhuang coal mine was non- caking and low-ash coal,the degradation of gangue was of frequent occurrence. The lump coal whose particle size ranged from 200 mm to 25 mm was separated by dense medium shallow slot separator,the slack coal whose particle size was below 25 mm was separated by unpressurized feeding three- product dense medium cyclone. The flip- flop screen conducted 6 mm dry screening,- 6 mm particles wasn't be separated. The main products of Songxinzhuang coal preparation plant were 200 mm to 50 mm large coal,50 mm to 25 mm medium- sized coal,- 25 mm clean coal,- 50 mm or- 25 mm mixed coal. The produces could be used in coal gasification,power generation and civilian fields.

       

    /

    返回文章
    返回